Automatic Doors

DORMATIC PHOTOCELL GLASS DOOR SYSTEMS

GLASS DOOR WITH SLIDING PHOTOCELL

1- Mechanism Features
1-1. The belt system that provides the movement of the doors will be operated by DC Type suitable for industrial use, 100W power, suitable for intensive use, 2 years warranty geared motor
1-2. The working voltage of the mechanism is230V. (A.C.) It is 50Hz and will tolerate voltage changes of 10%
1-3. The door system shall be suitable for operation at an ambient temperature of -15 to +50 ° C.
1-4. In order to prevent the doors from being closed and electronically locked, it will include functions such as closed (disabled), automatic (the whole system is activated), open (the door is open), one-way (the action unit is in one-way circuit), night (can work with the button from the inside locked from the outside), semi-open (50%) by means of the Digital-Mechanical Selector.
1-5. The event should be programmable in some way with the LCD screen on the control board.
1-6. Any faults in the mechanism should be visible on the LCD screen on the control board
1-7. It should have obstacle recognition feature with adjustable torque option. When it encounters an obstacle, it must be ensured that the door opens and checks until the obstacle passes.
1-8. In the event that the microprocessor unit encounters any obstacles during the failure of the radar and photocell, belt loosening and breakage, overload and opening and closing of the blades, the indicator on the mechanism will determine the fault and its location. When the mechanism is activated, it will automatically determine the on-off distances.
1-9. The mechanism will be adjustable in braking and slow motion areas (between 5 and 50 cm).
1-10. The closing and opening powers of the door and the opening and closing speeds can be adjusted independently of each other. In this way, if the door encounters any obstacles while closing, it will be able to open automatically without damaging it.
1-11. The door mechanism must have a system of three-wheel carriers, which will prevent derailment of the moving wings as a result of impact. The rail on which the wheel moves will be able to be replaced when worn out
1-12. In order to allow easy intervention to the mechanism in case of malfunction or maintenance, the mechanism cover is placed with top nails and will be opened without tools1-13. There will be two battery systems in the mechanism that will open the door in case of power cuts. Batteries will be able to open and close the door an average of 30-150 times.
1-14. Since infrared photocell(s) or curtain safety photocell is used on the door blades, the door will automatically reopen if an obstacle intervenes while the door is closing and will not close until the obstacle is removed.
1-15. The gate mechanism will have an energy block grounding line.

DORMATIC HERMETIC DOOR SYSTEMS
The mechanism box and cover must be made of extruded aluminum or stainless steel. It can be painted with RAL color electrostatic powder paint upon request. There should be no box and lid, which are made of painted sheet. The cover has a hinged system, it should be easy to open and intervene during any failure. There must be a battery system in the mechanism that will open the door in electrical devices.

The mechanism is on the electronic control board; There should be Full On-Full Off-One-way-AutoHalf-On modes. In case of any mishap (compression of the wing, placing an object in front of it, etc.), there must be an auto protection system to prevent damage to the engine and micropressor. The mechanism must be able to automatically adjust the opening-closing distance. It must have the ability to know what to do in the event of a power failure and the wing encountering obstacles. The door should be able to be easily opened and closed in the event of a power failure or when the door is moved to the manual position. The mechanism shall be capable of operating with wings of at least 2x120 kg. Carriage for single wing
its capacity shall be a minimum of 150 kg