Garden Gates

DORMATIC SLIDING GARDEN MOTOR SYSTEMS
1. Programmable microprocessor should be used in the control unit in the sliding garden gate motor.
2. The motor mechanics with the processor should be controlled with the help of the electric motor, the jamming function should be protected by the current control circuit on the board, the motor and the board should be protected. The card must also be protected against overcurrents with a glass fuse.
3. It should have a card system suitable for starting 2 synchronized sliding garden gate motors.
4. Flashing warning light should be used as a warning when the engine is running.
5. The engine should have an automatic shutdown function after switching on, and this function should be optionally activated or deactivated. The automatic switch-off time must be set analogue via the control card from 5 s to 90 s.
6. Sensors to be used for safety purposes in motor movements must be able to be connected. This
sensors must be able to be used for opening and closing with the help of adjustable functions
If the object passes while the engine is shutting down, the door must move in the direction of opening
After passing, the door should close automatically again. With the help of adjustable functions
If the object passes while the engine is opening, the door should stop, and when the object comes out of this direction, the motor is turned on
It should continue its movement in the direction.7. It must have electronic braking feature.
8. Must adapt to Internal or External remote control receiver system.
9. Thanks to the Open dry contact on the motor control card, the smart card system is
It should be designed in accordance with the access system (KGS) and the automatic pass system (OGS).
10. Motor and Switch direction should be able to be changed simultaneously via electronic card.
11. The engine must have a thermal protection system against burning in overheats.

DORMATIC CIRCULAR GARDEN MOTOR SYSTEMS
1. Programmable microprocessor in the control unit inside the circular garden gate motor
Use.
2. The motor mechanics with the processor should be controlled with the help of electric motor, the jamming function is board
The motor and card must be protected by the current control circuit on it. The card also protects against overcurrents
it should also be protected by insurance.
3. There should be jamming sensitivity in the direction of shutdown, and the motor should stop working at the time of jamming, followed by
it should continue its movement in the direction of opening.
4. There should be jamming sensitivity in the direction of opening, and the motor should stop working at the time of jamming.
5. The control unit should support operating the double wing door.
6. The delay time between the control unit and the two blades should be adjustable.
7. Must work with transformer.
8. The engine body must be equipped for manual intervention against power failures. Also electrical
It should continue to work with the battery charging card as an option against interruptions.
9. It should have a card system suitable for starting 2 synchronized circular garden gate motors.
10. It should have a slow start-slow stop feature.
11. Speed control should be ensured.
12. Flashing warning light should be used as a warning when the engine is running.
13. Red-Green traffic light should support you to connect.
14. The engine should have automatic shutdown function after switching on, and this function is optional
must be able to be activated or deactivated. Automatic shutdown time from 5 s to 90 s control card
It should be able to be set analogue via .
15. Sensors to be used for safety purposes in motor movements must be able to be connected. These sensors
it should be able to be used for opening and closing. Object when turning off the engine with the help of adjustable functions
If it passes, the door must move in the direction of opening and after the object passes in this direction, the door is automatic again
should close as. If the object passes while opening the engine with the help of adjustable functions, the door should stop
When the object comes out of the direction, the engine should continue its movement in the direction of opening.
16. Must adapt to Internal or External remote control receiver system.17. Smart card system thanks to the Open and Close dry contacts on the engine control card,
It should be designed in accordance with the card pass system (KGS) and automatic pass system (OGS).
18. Motor and Switch direction should be able to be changed simultaneously via electronic card.